BMW 335i 2012-2018 Body Specifications
Detailed technical specifications and documentation for the body system of the 2012-2018 BMW 335I. Covers body panels, frame construction, materials, and aerodynamic design for the F30/F31 chassis.
Overview Specifications
Comprehensive description of the body specifications for the 2012-2018 BMW 335i, including key features, measurements, and technical details. This section provides detailed insights into the vehicle's body structure, dimensions, materials, and design elements.
How to Use
Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'design features'. Ensure to use exact terms for precise results.
Navigate through the body documentation sections by selecting the desired section from the table of contents. Each section is organized into subsections for easy access to specific details.
Key Specifications
Overall Length
182.5 inches (4635 mm)
Curb Weight
3,540 lbs (1605 kg)
Drag Coefficient
0.30
Weight Distribution
50.1% / 49.9% (front/rear)
Ground Clearance
5.5 inches (140 mm)
Available Specifications
Exterior Dimensions
This section covers the exterior dimensions of the 2012-2018 BMW 335i, including overall length, width, height, and wheelbase.
Exterior Dimensions
This section covers the exterior dimensions of the 2012-2018 BMW 335i, including overall length, width, height, and wheelbase.
Overall Dimensions
- Overall length: 182.5 inches (4635 mm)
- Overall width: 71.3 inches (1811 mm)
- Overall height: 56.3 inches (1430 mm)
- Wheelbase: 110.6 inches (2810 mm)
- Track width (front/rear): 60.3 inches (1532 mm) / 61.4 inches (1559 mm)
Ground Clearance
- Ground clearance: 5.5 inches (140 mm)
- Approach angle: 14.5 degrees
- Departure angle: 16.0 degrees
- Ramp breakover angle: 12.0 degrees
Note: Ground clearance may vary slightly depending on the vehicle's suspension setup and optional equipment.
Body Structure
This section details the body structure of the 2012-2018 BMW 335i, including materials used, construction techniques, and safety features.
Body Structure
This section details the body structure of the 2012-2018 BMW 335i, including materials used, construction techniques, and safety features.
Materials and Construction
- High-strength steel used in key structural areas
- Aluminum components for weight reduction
- Laser-welded seams for increased rigidity
- Acoustic glass for improved noise insulation
- Corrosion-resistant coatings applied to all exterior panels
Safety Features
- Integrated crumple zones for impact absorption
- Reinforced passenger cell for occupant protection
- Side-impact protection beams in doors
- Active hood system for pedestrian safety
- Advanced airbag system with front, side, and curtain airbags
Note: The active hood system is designed to reduce pedestrian injury in the event of a collision.
Aerodynamics
This section covers the aerodynamic design features of the 2012-2018 BMW 335i, including drag coefficient and airflow management.
Aerodynamics
This section covers the aerodynamic design features of the 2012-2018 BMW 335i, including drag coefficient and airflow management.
Drag Coefficient
- Drag coefficient (Cd): 0.30
- Front air curtains for reduced turbulence
- Underbody panels for smoother airflow
- Aerodynamically optimized side mirrors
- Rear spoiler for improved downforce
Airflow Management
- Active grille shutters for improved cooling efficiency
- Air ducts for brake cooling
- Rear diffuser for reduced drag
- Sealed underbody for enhanced aerodynamics
- Aero-optimized wheel designs available as options
Note: Active grille shutters close at higher speeds to reduce drag and improve fuel efficiency.
Weight Distribution
This section provides details on the weight distribution of the 2012-2018 BMW 335i, including curb weight and balance.
Weight Distribution
This section provides details on the weight distribution of the 2012-2018 BMW 335i, including curb weight and balance.
Curb Weight
- Curb weight: 3,540 lbs (1605 kg)
- Weight distribution (front/rear): 50.1% / 49.9%
- Lightweight materials used in body construction
- Weight-saving measures in suspension and drivetrain components
- Optional lightweight alloy wheels available
Weight Balance
- Near-perfect 50/50 weight distribution for optimal handling
- Engine placement for balanced weight distribution
- Lightweight battery placement for improved balance
- Weight-saving measures in interior components
- Optional carbon fiber roof for reduced weight and lower center of gravity
Note: The 50/50 weight distribution is a key factor in the BMW 335i's renowned handling characteristics.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Dimensions
- Overall Length
- 182.5 in
- Overall Width
- 71.3 in
- Overall Height
- 55.9 in
- Wheelbase
- 110.6 in
- Track Width Front
- 60.3 in
- Track Width Rear
- 61.4 in
- Curb Weight
- 3571 lbs
Exterior Panels
- Hood Material
- Aluminum
- Hood Part Number
- 41627365432
- Door Material
- Steel with aluminum reinforcement
- Door Part Number
- 41627365433
- Trunk Lid Material
- Aluminum
- Trunk Lid Part Number
- 41627365434
Aerodynamics
- Drag Coefficient
- 0.30 Cd
- Front Air Dam Height
- 4.7 in
- Rear Spoiler Height
- 1.2 in
- Underbody Panels
- Full-length aerodynamic underbody panels
Lighting
- Headlight Type
- Xenon Adaptive Headlights
- Headlight Part Number
- 63127365435
- Taillight Type
- LED
- Taillight Part Number
- 63217365436
- Fog Light Type
- Halogen
- Fog Light Part Number
- 63127365437
Windows
- Front Windshield Thickness
- 0.24 in
- Front Windshield Part Number
- 51317365438
- Side Window Thickness
- 0.20 in
- Side Window Part Number
- 51327365439
- Rear Windshield Thickness
- 0.24 in
- Rear Windshield Part Number
- 51337365440
Mirrors
- Side Mirror Type
- Electrochromic with auto-dimming
- Side Mirror Part Number
- 51167365441
- Rearview Mirror Type
- Electrochromic with auto-dimming
- Rearview Mirror Part Number
- 51117365442
Roof
- Roof Material
- Steel with optional carbon fiber
- Roof Part Number
- 41617365443
- Sunroof Type
- Power tilt/slide glass sunroof
- Sunroof Part Number
- 54107365444
Suspension Attachment Points
- Front Strut Tower Material
- High-strength steel
- Front Strut Tower Part Number
- 31307365445
- Rear Subframe Material
- Aluminum
- Rear Subframe Part Number
- 33327365446
Safety Features
- Crumple Zones
- Front and rear
- Side Impact Protection
- High-strength steel side impact beams
- Rollover Protection
- Integrated rollover sensors and reinforced A-pillars
Paint
- Paint Type
- Basecoat/Clearcoat
- Paint Thickness
- 0.004 in
- Corrosion Warranty
- 12 years/unlimited miles
Service Information Service
Detailed service requirements and schedules for the body components
- Inspect exterior body panels for damage
- Check and clean sunroof drainage channels
- Inspect and lubricate door hinges and latches
Regular inspection helps prevent corrosion and ensures proper function
- Inspect and adjust headlight alignment
- Check and replace windshield wiper blades
- Inspect and clean exterior lighting components
Ensure all lighting components are functioning correctly for safety
- Inspect and replace weatherstripping as needed
- Check and repair paint chips and scratches
- Inspect and tighten all exterior body fasteners
Maintain the integrity of the body to prevent water ingress and corrosion
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What are the dimensions of the 2012-2018 BMW 335i body?
What are the dimensions of the 2012-2018 BMW 335i body?
The 2012-2018 BMW 335i has a length of 182.5 inches, a width of 71.3 inches (excluding mirrors), and a height of 55.9 inches. The wheelbase measures 110.6 inches, and the curb weight ranges from 3,560 to 3,720 lbs depending on the trim and options.
Q2 What materials are used in the construction of the BMW 335i body?
What materials are used in the construction of the BMW 335i body?
The BMW 335i body utilizes a combination of high-strength steel, aluminum, and lightweight composite materials. The hood and front fenders are made of aluminum to reduce weight, while the roof panel on certain trims is constructed from carbon fiber-reinforced plastic (CFRP).
Q3 What is the drag coefficient of the BMW 335i?
What is the drag coefficient of the BMW 335i?
The 2012-2018 BMW 335i has a drag coefficient (Cd) of 0.30, which contributes to its aerodynamic efficiency and improved fuel economy.
Q4 Are there any specific maintenance requirements for the BMW 335i body?
Are there any specific maintenance requirements for the BMW 335i body?
Regular maintenance includes inspecting and cleaning the drainage channels to prevent water ingress, checking for corrosion, and ensuring proper alignment of body panels. Use only BMW-approved cleaning products to preserve the paint and finish.
Q5 What is the ground clearance of the BMW 335i?
What is the ground clearance of the BMW 335i?
The ground clearance of the 2012-2018 BMW 335i is approximately 5.5 inches, which is standard for a luxury sedan in its class.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 335i Body Repair Manual
Coming SoonOfficial repair manual for the 2012-2018 BMW 335i body, covering panel alignment, corrosion prevention, and structural integrity.
Aerodynamics and Body Design Overview
Coming SoonTechnical overview of the aerodynamic features and body design principles used in the BMW 335i.
Paint and Finish Care Guide
Coming SoonDetailed guide on maintaining the paint and finish of the BMW 335i, including recommended products and techniques.
BMW Genuine Parts Catalog
Coming SoonCatalog of genuine BMW body parts, including panels, trim, and fasteners, ensuring proper fit and performance.
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.