BMW 335i 2005-2011

BMW 335i 2005-2011 Body Specifications

Detailed technical specifications and documentation for the body system of the 2005-2011 BMW 335I, covering body panels, dimensions, materials, and structural components for the E90/E92/E93 platform.

Updated Oct 14, 2023

Overview Specifications

Comprehensive description of the body specifications for the 2005-2011 BMW 335I, including key features, measurements, and technical details

How to Use

Use the search function to locate specific body specifications by entering keywords such as 'dimensions', 'materials', or 'weight'.

Navigate through the body documentation sections using the table of contents or by scrolling through the document. Each section is clearly labeled for easy access.

Key Specifications

Length

178.2 inches (4526 mm)

Curb Weight

3571 lbs (1620 kg)

Drag Coefficient

0.30

Ground Clearance

5.5 inches (140 mm)

Weight Distribution

50.1% / 49.9% (front/rear)

Available Specifications

Exterior Dimensions

Detailed measurements and specifications for the exterior dimensions of the 2005-2011 BMW 335I

Overall Dimensions

Length: 178.2 inches (4526 mm)
Width: 71.5 inches (1816 mm)
Height: 55.9 inches (1420 mm)
Wheelbase: 108.7 inches (2761 mm)
Track width (front/rear): 60.1 inches (1527 mm) / 60.7 inches (1542 mm)

Ground Clearance

Ground clearance: 5.5 inches (140 mm)
Approach angle: 14.5 degrees
Departure angle: 15.2 degrees
Ramp breakover angle: 12.8 degrees

Note: Ground clearance may vary slightly depending on suspension settings and tire size.

Body Materials

Information on the materials used in the construction of the 2005-2011 BMW 335I body

Primary Materials

High-strength steel used in the chassis and body structure
Aluminum used in the hood and front fenders
Thermoplastic materials for bumpers and trim
Galvanized steel for corrosion resistance

Weight Distribution

Curb weight: 3571 lbs (1620 kg)
Weight distribution (front/rear): 50.1% / 49.9%
Weight of body-in-white: 660 lbs (299 kg)
Weight of exterior panels: 220 lbs (100 kg)

Note: Weight distribution is optimized for balanced handling and performance.

Aerodynamics

Aerodynamic features and specifications of the 2005-2011 BMW 335I body

Drag Coefficient

Drag coefficient (Cd): 0.30
Frontal area: 23.1 sq ft (2.15 sq m)
Air resistance at 62 mph (100 km/h): 0.35 kN
Underbody aerodynamics: Fully enclosed underbody panels

Aero Features

Active front grille shutters for improved airflow
Rear spoiler integrated into the trunk lid
Aero-optimized side mirrors
Air curtains in the front bumper for reduced turbulence

Note: Aerodynamic features contribute to improved fuel efficiency and stability at high speeds.

Safety Features

Safety-related body specifications for the 2005-2011 BMW 335I

Crash Safety

Front and rear crumple zones designed for impact absorption
High-strength steel safety cage around the passenger compartment
Side-impact protection beams in doors
Energy-absorbing steering column

Pedestrian Safety

Deformable hood structure for pedestrian impact protection
Energy-absorbing front bumper
Raised engine bay to create space for impact absorption
Breakaway windshield wipers

Note: Pedestrian safety features are designed to reduce injury in the event of a collision.

Search Specifications

Search by specification name, value, or description

Component Specifications

Dimensions

Overall Length: 178.2 in

Overall Width: 71.5 in

Overall Height: 55.9 in

Wheelbase: 108.7 in

Track Width Front: 59.1 in

Track Width Rear: 60.1 in

Ground Clearance: 5.5 in

Weight

Curb Weight: 3571 lbs

Gross Vehicle Weight: 4620 lbs

Front Axle Weight: 1984 lbs

Rear Axle Weight: 1587 lbs

Payload Capacity: 1049 lbs

Body Materials

Roof: Steel with optional CFRP (Carbon Fiber Reinforced Plastic)

Hood: Aluminum

Trunk Lid: Steel

Doors: Steel with aluminum reinforcement

Fenders: Plastic

Aerodynamics

Drag Coefficient: 0.30 Cd

Frontal Area: 23.5 sq ft

Lift Coefficient Front: 0.12

Lift Coefficient Rear: 0.08

Exterior Lighting

Headlights: Type: Xenon HID with adaptive lighting
Part Number: 63117163157
Wattage: 35W
Color Temperature: 4300K

Taillights: Type: LED
Part Number: 63217212345
Wattage: 10W

Fog Lights: Type: Halogen
Part Number: 63117163158
Wattage: 55W

Windows

Front Windshield: Thickness: 5.5 mm
Tint: 70% VLT (Visible Light Transmission)
Part Number: 51317163159

Side Windows: Thickness: 4.0 mm
Tint: 70% VLT
Part Number: 51317163160

Rear Windshield: Thickness: 5.5 mm
Tint: 70% VLT
Part Number: 51317163161

Mirrors

Side Mirrors: Type: Electrically adjustable with heating
Part Number: 51167163162
Dimensions: 6.3 x 4.7 in

Rearview Mirror: Type: Auto-dimming
Part Number: 51167163163
Dimensions: 8.3 x 3.5 in

Paint

Base Coat Thickness: 0.002 in

Clear Coat Thickness: 0.0015 in

Color Options

Alpine White
Jet Black
Sparkling Graphite
Monaco Blue
Crimson Red

Paint Code Reference: Alpine White: 300
Jet Black: 668
Sparkling Graphite: A22
Monaco Blue: A30
Crimson Red: A73

Suspension Attachment Points

Front Strut Towers: Material: High-strength steel
Bolt Size: M12 x 1.5
Torque Spec: 85 ft-lbs

Rear Subframe: Material: Aluminum
Bolt Size: M14 x 1.5
Torque Spec: 110 ft-lbs

Safety Features

Crumple Zones: Front: High-strength steel with energy-absorbing design
Rear: High-strength steel with energy-absorbing design

Side Impact Protection: Material: Ultra-high-strength steel
Thickness: 1.2 mm

Rollover Protection: Type: Integrated roll bars in C-pillars
Material: High-strength steel

Service Information Service

Detailed service requirements and schedules for the body components

15000

Inspect body panels for damage or corrosion
Check and lubricate door hinges and latches
Inspect exterior lighting for proper operation

Ensure all body components are free from damage and functioning correctly

30000

Inspect and clean sunroof drainage channels
Check windshield wiper blades for wear
Inspect and adjust side mirrors

Pay special attention to areas prone to water accumulation

60000

Inspect and replace worn weatherstripping
Check and tighten all body fasteners
Inspect and repair any paint damage

Address any rust or corrosion issues immediately

Frequently Asked Questions

Find answers to common questions about torque specifications

What are the exterior dimensions of the 2005-2011 BMW 335i?

The 2005-2011 BMW 335i has an overall length of 178.2 inches, a width of 71.5 inches (excluding mirrors), and a height of 55.9 inches. The wheelbase measures 108.7 inches, and the curb weight ranges from 3,571 to 3,726 lbs depending on the trim and options.

What type of body construction is used in the BMW 335i?

The BMW 335i features a unibody construction with high-strength steel and aluminum components. This design enhances structural rigidity, improves crash safety, and reduces overall weight for better performance and fuel efficiency.

What is the drag coefficient of the BMW 335i?

The BMW 335i has a drag coefficient (Cd) of 0.30, which contributes to its aerodynamic efficiency and reduces wind noise at higher speeds.

What materials are used in the body panels of the BMW 335i?

The body panels of the BMW 335i are primarily made of steel, with aluminum used for the hood and front fenders to reduce weight and improve weight distribution.

What is the ground clearance of the BMW 335i?

The ground clearance of the BMW 335i is approximately 5.1 inches, which is typical for a sport sedan and ensures a balance between performance and practicality.

Are there any specific rust-prone areas on the BMW 335i body?

Common rust-prone areas on the BMW 335i include the wheel arches, underbody, and areas around the trunk lid. Regular inspection and maintenance, including underbody cleaning and rustproofing, are recommended to prevent corrosion.

Factory Service Resources

Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.

BMW 335i Body Repair Manual

Coming Soon

Official repair manual for the BMW 335i body, including detailed procedures for panel replacement, dent repair, and corrosion prevention.

Aerodynamics and Body Design Whitepaper

Coming Soon

Technical whitepaper explaining the aerodynamic principles and body design features of the BMW 335i.

BMW Genuine Parts Catalog

Coming Soon

Catalog of genuine BMW body parts for the 335i, including part numbers and compatibility information.

Rust Prevention and Maintenance Guide

Coming Soon

Comprehensive guide on preventing rust and maintaining the body of the BMW 335i, including recommended products and techniques.

About the Author

Expert automotive knowledge and experience

ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact

15+ Years

Experience

500+ Guides

Guides

50+ Makes

Vehicles

1000+ Solutions

Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

ASE Master Technician Certification
Advanced Diagnostic Specialist
Hybrid/Electric Vehicle Systems
Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information

The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.

Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information

All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
Vehicle specifications and procedures may vary by model year, trim level, and region.
Always follow the manufacturer's recommended procedures and safety precautions.
Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
If you're unsure about any procedure, consult a qualified professional mechanic.

Intellectual Property

All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.