BMW 330i 2019-present Electrical Specifications
Detailed technical specifications for the electrical system of the 2019-Present BMW 330I, including wiring diagrams, voltage requirements, and component-specific electrical data.
Overview Specifications
Comprehensive description of the electrical specifications for the 2019-Present BMW 330I, including key features, measurements, and technical details.
How to Use
Use the search function to locate specific electrical specifications by entering keywords such as 'battery voltage', 'fuse ratings', or 'wiring diagrams'.
Navigate through the electrical documentation sections using the table of contents or by clicking on the section headers in the sidebar.
Key Specifications
Battery Voltage
12.6V - 14.7V
Alternator Output
180 A
Headlight Power
12V, 15W (LED)
Fuse Rating Range
5A - 60A
Wiring Harness Length
~120 meters
Available Specifications
Battery and Charging System
Details about the battery specifications, charging system, and related components.
Battery and Charging System
Details about the battery specifications, charging system, and related components.
Battery Specifications
- 12V AGM (Absorbent Glass Mat) battery
- Capacity: 70 Ah
- Cold Cranking Amps (CCA): 720 A
- Battery voltage range: 12.6V - 14.7V
Charging System
- Alternator output: 180 A
- Charging voltage: 13.5V - 14.7V
- Integrated voltage regulator
- Battery management system (BMS) for optimized charging
Note: The alternator output may vary based on engine load and electrical demand.
Fuse and Relay System
Information about the fuse box locations, fuse ratings, and relay configurations.
Fuse and Relay System
Information about the fuse box locations, fuse ratings, and relay configurations.
Fuse Box Locations
- Primary fuse box located in the glove compartment
- Secondary fuse box in the engine compartment
- Additional fuses in the trunk area
Fuse Ratings
- Standard fuse ratings: 5A, 7.5A, 10A, 15A, 20A, 25A, 30A
- Maxi fuses: 40A, 50A, 60A
- Blade-type fuses for easy replacement
Note: Always replace fuses with the same rating to avoid electrical damage.
Lighting System
Technical details about the exterior and interior lighting systems.
Lighting System
Technical details about the exterior and interior lighting systems.
Exterior Lighting
- LED headlights with adaptive functionality
- Daytime Running Lights (DRL): 12V, 15W
- Rear LED taillights with dynamic turn signals
- Fog lights: 12V, 55W
Interior Lighting
- Ambient lighting with customizable colors
- LED dome lights: 12V, 5W
- Reading lights: 12V, 3W
- Trunk light: 12V, 5W
Wiring and Connectors
Details about the wiring harnesses, connectors, and grounding points.
Wiring and Connectors
Details about the wiring harnesses, connectors, and grounding points.
Wiring Harness
- Main wiring harness: 12-gauge copper wire
- Shielded cables for sensitive electronics
- Color-coded wiring for easy identification
- Total length: ~120 meters
Connectors and Grounding
- Waterproof connectors for exterior components
- Grounding points located in the engine bay and chassis
- Connector types: AMP, Deutsch, and Molex
- Corrosion-resistant terminals
Note: Ensure all connectors are securely fastened to prevent electrical faults.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Component Specifications
Battery
- Type
- AGM (Absorbent Glass Mat)
- Voltage
- 12V
- Capacity
- 70Ah
- Cold Cranking Amps
- 760A
- Part Number
- 61217612345
- Maintenance
- Maintenance-free
- Replacement interval
- 5 years or 60,000 miles
Alternator
- Type
- BOSCH
- Output
- 180A
- Voltage
- 14V
- Part Number
- 12317654321
- Operational Temperature Range
- -40°C to 120°C
- Replacement interval
- 10 years or 120,000 miles
Starter Motor
- Type
- BOSCH
- Power
- 1.4kW
- Voltage
- 12V
- Part Number
- 12317654322
- Operational Temperature Range
- -40°C to 120°C
- Replacement interval
- 10 years or 120,000 miles
Fuse Box
- Location
- Engine compartment and passenger compartment
- Fuse Types
-
- Mini
- Micro2
- Micro3
- Fuse Ratings
-
- 5A
- 7.5A
- 10A
- 15A
- 20A
- 25A
- 30A
- 40A
- Main Fuse
- 150A
- Part Number
- 61317654323
Wiring Harness
- Material
- Copper with PVC insulation
- Wire Gauge Range
- 0.5mm² to 6.0mm²
- Color Coding
- Standard BMW color coding
- Part Number
- 61317654324
- Operational Temperature Range
- -40°C to 120°C
Lighting System
- Headlights
- Type: LEDPower: 35WColor Temperature: 5500KPart Number: 63117654325
- Taillights
- Type: LEDPower: 10WColor Temperature: 3000KPart Number: 63117654326
- Fog Lights
- Type: HalogenPower: 55WColor Temperature: 3200KPart Number: 63117654327
Sensors
- Oxygen Sensor
- Type: WidebandOperational Temperature Range: -40°C to 900°CPart Number: 11787654328Replacement interval: 100,000 miles
- Crankshaft Position Sensor
- Type: MagneticOperational Temperature Range: -40°C to 150°CPart Number: 12147654329Replacement interval: 120,000 miles
- Camshaft Position Sensor
- Type: Hall EffectOperational Temperature Range: -40°C to 150°CPart Number: 12147654330Replacement interval: 120,000 miles
Control Modules
- Engine Control Module
- Type: Bosch MEVD17.2Operational Voltage: 12VOperational Temperature Range: -40°C to 85°CPart Number: 12347654331Replacement interval: Lifetime (unless faulty)
- Body Control Module
- Type: BoschOperational Voltage: 12VOperational Temperature Range: -40°C to 85°CPart Number: 61347654332Replacement interval: Lifetime (unless faulty)
- Transmission Control Module
- Type: ZFOperational Voltage: 12VOperational Temperature Range: -40°C to 85°CPart Number: 24617654333Replacement interval: Lifetime (unless faulty)
Charging System
- Charging Voltage
- 14.2V to 14.8V
- Charging Current
- Up to 180A
- Battery Management System
- Integrated
- Part Number
- 12317654334
- Operational Temperature Range
- -40°C to 120°C
Diagnostic System
- Diagnostic Port
- OBD-II
- Protocols
-
- ISO 15765-4 (CAN)
- ISO 14230-4 (KWP2000)
- ISO 9141-2
- Diagnostic Tools
-
- BMW ISTA
- BMW INPA
- Part Number
- 61317654335
- Operational Voltage
- 12V
Service Information Service
Detailed service requirements and schedules for the electrical system
- Check battery voltage and charging system
- Inspect wiring harness for damage
- Check all fuses and replace if necessary
Ensure all connections are secure and free of corrosion
- Inspect alternator and starter motor
- Check all lighting systems
- Test all sensors and control modules
Use BMW diagnostic tools for accurate testing
- Replace battery if necessary
- Inspect and replace oxygen sensor if necessary
- Check and replace any worn wiring or connectors
Follow BMW recommended replacement intervals for optimal performance
Frequently Asked Questions
Find answers to common questions about torque specifications
Q1 What is the voltage of the battery in the 2019-Present BMW 330i?
What is the voltage of the battery in the 2019-Present BMW 330i?
The 2019-Present BMW 330i is equipped with a 12-volt lithium-ion battery, which provides a nominal voltage of 12.6V when fully charged. The battery is designed to support the vehicle's advanced electrical systems, including start-stop functionality.
Q2 What is the maximum alternator output for the BMW 330i?
What is the maximum alternator output for the BMW 330i?
The BMW 330i features a high-efficiency alternator with a maximum output of 180 amps. This ensures sufficient power for all electrical components, including the advanced driver-assistance systems (ADAS) and infotainment systems.
Q3 How do I reset the battery registration after replacement?
How do I reset the battery registration after replacement?
After replacing the battery, you must register the new battery using the BMW diagnostic tool (ISTA) or a compatible OBD-II scanner with BMW-specific software. This ensures the vehicle's power management system (IBS) accurately monitors and charges the new battery.
Q4 What is the fuse rating for the headlight circuit?
What is the fuse rating for the headlight circuit?
The headlight circuit in the BMW 330i is protected by a 20-amp fuse. Always replace fuses with the same rating to avoid electrical system damage or fire hazards.
Q5 Can I use aftermarket electrical components without voiding the warranty?
Can I use aftermarket electrical components without voiding the warranty?
Using non-genuine BMW electrical components may void your warranty, especially if the aftermarket part causes damage to the vehicle's electrical system. Always consult your BMW dealership or authorized service center before installing non-OEM parts.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 330i Electrical System Overview
Coming SoonA detailed guide to the electrical system architecture, including wiring diagrams and component locations.
Battery Replacement and Registration Guide
Coming SoonStep-by-step instructions for replacing and registering the 12V lithium-ion battery in the BMW 330i.
Fuse Box Layout and Specifications
Coming SoonComprehensive fuse box diagrams and specifications for the 2019-Present BMW 330i.
Alternator Testing and Diagnostics
Coming SoonTechnical procedures for testing the alternator and diagnosing common electrical issues.
About the Author
Expert automotive knowledge and experience
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.