BMW 330i 2019-present 2.0L Engine Specifications
Detailed technical specifications and documentation for the 2.0L turbocharged inline-4 engine (B48B20) in the 2019-Present BMW 330i. Includes performance data, system details, and compliance information.
Overview Specifications
Comprehensive description of the 2.0l-engine specifications for the 2019-Present BMW 330I, including key features, measurements, and technical details
How to Use
Use the search bar to find specific 2.0l-engine specifications by entering keywords such as 'torque', 'horsepower', or 'compression ratio'.
Navigate through the 2.0l-engine documentation sections using the table of contents or by scrolling through the document. Each major section is clearly labeled for easy access.
Key Specifications
Displacement
1998 cc
Horsepower
255 hp
Torque
295 lb-ft
Compression Ratio
10.2:1
Fuel Type
Premium unleaded (91 octane or higher)
Available Specifications
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency.
Engine Performance
Detailed information on the performance characteristics of the 2.0l-engine, including power output, torque, and fuel efficiency.
Power Output
- Maximum horsepower: 255 hp at 5000-6500 rpm
- Peak torque: 295 lb-ft at 1550-4400 rpm
- Redline: 7000 rpm
- Compression ratio: 10.2:1
- Fuel system: Direct injection with High Precision Injection
Fuel Efficiency
- City fuel economy: 26 mpg
- Highway fuel economy: 36 mpg
- Combined fuel economy: 30 mpg
- Fuel type: Premium unleaded (91 octane or higher)
Note: Fuel efficiency may vary based on driving conditions and vehicle configuration.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and cooling systems.
Engine Design
Technical details on the design and construction of the 2.0l-engine, including materials, layout, and cooling systems.
Engine Layout
- Engine type: Inline 4-cylinder
- Displacement: 1998 cc
- Bore x Stroke: 94.6 mm x 82.0 mm
- Valvetrain: DOHC with Valvetronic and Double-VANOS
- Cylinder head material: Aluminum
Cooling System
- Coolant capacity: 10.6 liters
- Thermostat opening temperature: 97°C
- Radiator type: Cross-flow with electric fan
- Coolant type: BMW-approved ethylene glycol-based coolant
Note: Regular coolant checks and replacements are recommended to maintain optimal engine performance.
Emissions and Compliance
Information on the 2.0l-engine's emissions standards, exhaust system, and compliance with environmental regulations.
Emissions and Compliance
Information on the 2.0l-engine's emissions standards, exhaust system, and compliance with environmental regulations.
Emissions Control
- Emission standard: Euro 6d-TEMP
- Catalytic converter: Close-coupled with secondary catalytic converter
- Exhaust gas recirculation (EGR): Integrated into the turbocharger system
- Particulate filter: Gasoline particulate filter (GPF)
Exhaust System
- Exhaust manifold: Integrated into the cylinder head
- Exhaust pipe diameter: 70 mm
- Muffler: Twin-pipe design with active exhaust flap
- Tailpipe configuration: Dual chrome-plated tailpipes
Note: The active exhaust flap adjusts based on driving conditions to optimize performance and sound.
Search Specifications
Search by specification name, value, or description
Type to search through torque specifications. Results will appear below as you type.
Engine Specifications
General Specifications
- Engine Code
- B48B20
- Displacement
- 1998 cc
- Configuration
- Inline 4-cylinder
- Aspiration
- TwinPower Turbo
- Fuel Type
- Premium unleaded gasoline (91 AKI minimum)
- Oil Capacity
- 5.25 liters
- Oil Type
- BMW Longlife-01 FE 0W-20 or 0W-30
- Coolant Capacity
- 8.5 liters
- Coolant Type
- BMW Antifreeze and Corrosion Inhibitor
Performance Specifications
- Max Power
- 255 hp @ 5000-6500 rpm
- Max Torque
- 295 lb-ft @ 1550-4400 rpm
- Compression Ratio
- 11.0:1
- Redline
- 7000 rpm
- Fuel System
- Direct injection with High Precision Injection (HPI)
- Emission Standard
- EU6
Dimensions And Weight
- Engine Length
- 520 mm
- Engine Width
- 680 mm
- Engine Height
- 680 mm
- Dry Weight
- 152 kg
- Wet Weight
- 168 kg
Cylinder Head Specifications
- Material
- Aluminum alloy
- Valvetrain
- DOHC, 16 valves
- Valve Diameter intake
- 32 mm
- Valve Diameter Exhaust
- 28 mm
- Valve Spring Type
- Dual spring
- Camshaft Material
- Forged steel
Piston And Connecting Rod Specifications
- Piston Material
- Aluminum alloy
- Piston Diameter
- 82 mm
- Piston Ring Material
- Steel
- Connecting Rod Material
- Forged steel
- Connecting Rod Length
- 145 mm
- Crankshaft Material
- Forged steel
Turbocharger Specifications
- Turbo Type
- Twin-scroll turbocharger
- Boost Pressure
- 18 psi
- Wastegate Type
- Electronically controlled
- intercooler Type
- Air-to-air
- Turbo Lubrication
- Engine oil-fed
Fuel System Specifications
- Fuel Pump Type
- Electric high-pressure pump
- Fuel Pressure
- 200 bar
- injector Type
- Solenoid-operated
- injector Part Number
- 13537585222
- Fuel Filter Part Number
- 13327703022
Ignition System Specifications
- Ignition Type
- Coil-on-plug
- Spark Plug Type
- BMW NGK SILZKBR8D8S
- Spark Plug Gap
- 0.7-0.8 mm
- Ignition Coil Part Number
- 12138616153
Lubrication System Specifications
- Oil Pump Type
- Variable displacement
- Oil Filter Part Number
- 11427566327
- Oil Pressure
- 4.5-5.5 bar at 2000 rpm
- Oil Cooler Type
- Integrated water-to-oil cooler
Cooling System Specifications
- Thermostat Opening Temperature
- 97°C
- Water Pump Type
- Electric
- Radiator Type
- Aluminum cross-flow
- Coolant Pump Part Number
- 11518617807
- Coolant Temperature Sensor Part Number
- 13621433076
Maintenance Specifications
- Oil Change interval
- 10000 miles or 12 months
- Spark Plug Replacement interval
- 60000 miles
- Timing Chain Replacement Interval
- Lifetime (inspect every 100000 miles)
- Air Filter Replacement interval
- 30000 miles
- Fuel Filter Replacement interval
- 60000 miles
Diagnostic Specifications
- Obd Ii Compliance
- Yes
- Diagnostic Connector Location
- Under dashboard, driver's side
- Common Fault Codes
-
- P0171
- P0300
- P0420
- Diagnostic Tool
- BMW ISTA+
- Sensor References
- Oxygen Sensor Part Number: 11787558025Mass Air Flow Sensor Part Number: 13627585222Crankshaft Position Sensor Part Number: 12147585222
Service Information Service
Detailed service requirements and schedules for the 2.0L engine
- Engine oil and filter change
- Inspect brake system
- Check coolant level
- Inspect exhaust system
Use only BMW-approved fluids and parts
- Replace air filter
- Inspect fuel system
- Check drive belts
- Inspect suspension components
Perform visual inspection of engine components
- Replace spark plugs
- Replace fuel filter
- Inspect timing chain
- Check turbocharger system
Timing chain inspection is critical for long-term reliability
Common Questions
Find answers to common questions about torque specifications
Q1 What is the horsepower and torque output of the 2.0L engine in the 2019-Present BMW 330i?
What is the horsepower and torque output of the 2.0L engine in the 2019-Present BMW 330i?
The 2.0L turbocharged inline-4 engine in the BMW 330i produces 255 horsepower at 5,000-6,500 rpm and 295 lb-ft of torque at 1,550-4,400 rpm.
Q2 What type of fuel system does the 2.0L engine use?
What type of fuel system does the 2.0L engine use?
The 2.0L engine utilizes a high-precision direct injection fuel system, which optimizes fuel delivery for improved efficiency and performance.
Q3 What is the recommended oil type and capacity for the 2.0L engine?
What is the recommended oil type and capacity for the 2.0L engine?
The recommended oil type is BMW Longlife-01 FE 0W-20 or 5W-30 synthetic oil. The oil capacity is approximately 5.0 liters (5.3 quarts).
Q4 What is the compression ratio of the 2.0L engine?
What is the compression ratio of the 2.0L engine?
The compression ratio of the 2.0L engine is 10.2:1, which contributes to its balance of power and efficiency.
Q5 Does the 2.0L engine feature Valvetronic technology?
Does the 2.0L engine feature Valvetronic technology?
Yes, the 2.0L engine is equipped with BMW's Valvetronic variable valve lift system, which enhances throttle response and fuel efficiency.
Q6 What is the service interval for spark plugs on the 2.0L engine?
What is the service interval for spark plugs on the 2.0L engine?
The recommended service interval for spark plugs is every 60,000 miles or as specified in the vehicle's maintenance schedule.
Factory Service Resources
Access official service manuals, technical documents, and repair guides. These resources provide detailed procedures, specifications, and diagrams directly from the manufacturer.
BMW 330i Owner's Manual
Coming SoonOfficial owner's manual for the 2019-Present BMW 330i, including detailed maintenance schedules and technical specifications.
2.0L Engine Maintenance Guide
Coming SoonStep-by-step guide for maintaining the 2.0L engine, including oil changes, filter replacements, and inspection procedures.
BMW Technical Service Bulletins
Coming SoonAccess to official BMW technical service bulletins related to the 2.0L engine, addressing common issues and updates.
Genuine BMW Parts Catalog
Coming SoonCatalog of genuine BMW parts for the 2.0L engine, ensuring compatibility and optimal performance.
Legal Disclaimer
Important information about using this content
Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.
General Information
Warranty & Liability
The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.
We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.
Technical Information
- All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
- Vehicle specifications and procedures may vary by model year, trim level, and region.
- Always follow the manufacturer's recommended procedures and safety precautions.
- Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
- If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
About the Author
Expert automotive knowledge and experience
'/%3E%3Cpath d='M60 30a20 20 0 1 1 0 40 20 20 0 0 1 0-40zm0 45c16.5 0 30 7.5 30 16.8V100H30v-8.2c0-9.3 13.5-16.8 30-16.8z' fill='%23404040'/%3E%3C/svg%3E)
Diagnostic
Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.
Repair
Expert in both traditional mechanical repairs and modern vehicle systems.
Additional Expertise
Documentation
Created over 500 detailed repair guides and technical documents.
Training
Conducted technical training sessions and contributed to repair databases.
Certifications & Research
Certifications
- ASE Master Technician Certification
- Advanced Diagnostic Specialist
- Hybrid/Electric Vehicle Systems
- Performance Tuning Expert
Research & Community
Actively researches emerging technologies and contributes to automotive forums.